TS5207N577
Tamagawa
Availability: | |
---|---|
Quantity: | |
Tamagawa OIH48 Hollow Shaft Type High Precision Hollow Shaft Encoder Servo Motor Encoder
Encoders, at present, have been widely used for factory automations, measurements, office automation devices, medical equipment, aviation and universal fields. From small to high absolution are available to meet all of the requirements.
Model No. | TS52□□N5□□ | |
---|---|---|
Appearance | ![]() | |
Series | OIH48 | |
Outside Diameter | Φ48 mm | |
Moter Shaft Diameter | Φ8 mm | |
Resolution | 1,000 to 12,000 C/T | |
Output Phase | A,B,Z,U,V,W Phase | |
Supply Voltage | DC +5 V | |
Consumption Current (NOTE1) | 200 mA Max | |
Output Form | Line Driver | |
Maximum Response Frequency | 200 kHz | |
Starting Torque | 5.9×10-3 N⋅m (60 gf⋅cm Max) | |
Moment of Inertia | 1.0×10-6 kg・m2 Max (10 g・cm2 Max) | |
Maximun Allowable Rotation | 6,000 min-1(rpm) | |
Allowable Shaft Load (NOTE2) | Radial | Mounting Tolerance Radial 0.05 mm TIR Max Axial 0.2 mm Max Shaft Inclination 0.1°Max |
Axial | ||
Mass | 0.3 kg Max | |
Protective Structure (NOTE3) | IP=40 | |
Operating Temp. Range | -20 to +85 °C | |
Vibration (NOTE4) | 49 m/s2 (5G) | |
Shock (NOTE5) | 980 m/s2 (100 G) |
NOTE 1) Consumption Current: Specified value for an output circuit with no load.
NOTE 2) Specified value for the Allowable Shaft Load. Usage to within 20% of the specified value is recommended on actual use.
NOTE 3) Regarding special specifications for the Protective Structure, please consult us.
NOTE 4) Vibration: Value which satisfies the conditions of 2 hours each for axes X, Y and Z, for a total of 6 hours.
NOTE 5) Shock: Value which satisfies the conditions of 3 times each for axes X, Y and Z, for a total of 18 times.
Tamagawa OIH48 Hollow Shaft Type High Precision Hollow Shaft Encoder Servo Motor Encoder
Encoders, at present, have been widely used for factory automations, measurements, office automation devices, medical equipment, aviation and universal fields. From small to high absolution are available to meet all of the requirements.
Model No. | TS52□□N5□□ | |
---|---|---|
Appearance | ![]() | |
Series | OIH48 | |
Outside Diameter | Φ48 mm | |
Moter Shaft Diameter | Φ8 mm | |
Resolution | 1,000 to 12,000 C/T | |
Output Phase | A,B,Z,U,V,W Phase | |
Supply Voltage | DC +5 V | |
Consumption Current (NOTE1) | 200 mA Max | |
Output Form | Line Driver | |
Maximum Response Frequency | 200 kHz | |
Starting Torque | 5.9×10-3 N⋅m (60 gf⋅cm Max) | |
Moment of Inertia | 1.0×10-6 kg・m2 Max (10 g・cm2 Max) | |
Maximun Allowable Rotation | 6,000 min-1(rpm) | |
Allowable Shaft Load (NOTE2) | Radial | Mounting Tolerance Radial 0.05 mm TIR Max Axial 0.2 mm Max Shaft Inclination 0.1°Max |
Axial | ||
Mass | 0.3 kg Max | |
Protective Structure (NOTE3) | IP=40 | |
Operating Temp. Range | -20 to +85 °C | |
Vibration (NOTE4) | 49 m/s2 (5G) | |
Shock (NOTE5) | 980 m/s2 (100 G) |
NOTE 1) Consumption Current: Specified value for an output circuit with no load.
NOTE 2) Specified value for the Allowable Shaft Load. Usage to within 20% of the specified value is recommended on actual use.
NOTE 3) Regarding special specifications for the Protective Structure, please consult us.
NOTE 4) Vibration: Value which satisfies the conditions of 2 hours each for axes X, Y and Z, for a total of 6 hours.
NOTE 5) Shock: Value which satisfies the conditions of 3 times each for axes X, Y and Z, for a total of 18 times.
content is empty!